500W Spindle Motor + 110V Speed Governor with MACH3 + Mount bracket + 13PCS ER11 collect + 4 Screws
Input: AC110V± 10%50/60Hz
Operating voltage: 100VDC
Speed: Up to idle up to 12,000 rev / min
Insulation resistance:> 2 megohms
Dielectric strength: 400V
Chuck portion length: 45MM
Chuck portion diameter: 16mm
Motor Length: 200MM
High precision spindle runout 0.01-0.03
Power supply Specification: (and this spindle supporting the use of the)
13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM
(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm), Run-out tolerance 0.01mm (0.0006″)
1 x 500W Air-Cooled Spindle Motor
1 x 110V Speed Governor with MACH3
1 x 52mm Mount bracket
13 x ER11 collect
4 x Screws(free)
Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM.
Insulation resistance:> 2 megohms, Dielectric strength: 400V.
Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
Motor Length: 200MM, High precision spindle run out 0.01-0.03
100% service satisfactory, If you have any questions, please contact us